Acoustic energy harvesting using an electromechanical Helmholtz resonator

This paper presents the development of an acoustic energy harvester using an electromechanical Helmholtz resonator (EMHR). The EMHR consists of an orifice, cavity, and a piezoelectric diaphragm. Acoustic energy is converted to mechanical energy when sound incident on the orifice generates an oscillatory pressure in the cavity, which in turns causes the vibration of the diaphragm. The conversion of acoustic energy to electrical energy is achieved via piezoelectric transduction in the diaphragm of the EMHR. Moreover, the diaphragm is coupled with energy reclamation circuitry to increase the efficiency of the energy conversion. Lumped element modeling of the EMHR is used to provide physical insight into the coupled energy domain dynamics governing the energy reclamation process. The feasibility of acoustic energy reclamation using an EMHR is demonstrated in a plane wave tube for two power converter topologies. The first is comprised of only a rectifier, and the second uses a rectifier connected to a flyback converter to improve load matching. Experimental results indicate that approximately 30 mW of output power is harvested for an incident sound pressure level of 160 dB with a flyback converter. Such power level is sufficient to power a variety of low power electronic devices.     

Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

Stereoselective Synthesis of the Proposed C79–C104 Fragment of Symbiodinolide

Stereoselective and streamlined synthesis of the proposed C79–C104 fragment 2 of symbiodinolide ( 1 ), a polyol marine natural product with a molecular weight of 2860, was achieved. In the synthetic route, the proposed C79–C104 fragment 2 was synthesized by utilizing a Julia–Kocienski olefination and subsequent Sharpless asymmetric dihydroxylation as key transformations in a convergent manner. Detailed comparison of the ¹³C NMR chemical shifts between the natural product and the synthetic C79–C104 fragment 2 revealed that the stereostructure at the C91–C99 carbon chain moiety of symbiodinolide ( 1 ) should be reinvestigated.     

Palladium(II)‐Catalyzed Dehydroboration via Generation of Boron Enolates

The Pd^II‐catalyzed dehydroboration of boron enolates generated from ketones and 9‐iodo‐9‐borabicyclo[3.3.1]nonane was achieved, providing a synthetically versatile protocol from ketones to α,β‐unsaturated ketones. The Pd^II compound employed in this reaction worked catalytically in the presence of Cu(OAc)₂. The high trans‐selectivity of the olefinic moiety was observed. Aryl halide moieties (‐Br and ‐Cl) remained intact for this reaction in spite of the presence of a Pd species. An ester substrate could also be applied when a stoichiometric amount of Pd^II was used. The crossover reactions using boron and silyl enolates revealed that the oxidation reaction is much faster than the Saegusa‐Ito reaction.     

Formal total synthesis of enigmazole A

A stereoselective formal total synthesis of enigmazole A, a marine macrolide isolated from Cinachyrella enigmatica, is described. Lewis acid mediated intramolecular allylation of an α-acetoxy ether, prepared from alcohol and carboxylic acid fragments was carried out to construct the methylene THP ring with high stereoselectivity. The late-stage macrolactonization of the corresponding seco-acid provided a known synthetic intermediate of enigmazole A.     

Development of pyrrole-imidazole polyamide for specific regulation of human aurora kinase-A and -B gene expression

Pyrrole-imidazole polyamide (PIP) is a nuclease-resistant novel compound that inhibits gene expression through binding to the minor groove of DNA. Human aurora kinase-A (AURKA) and -B (AURKB) are important regulators in mitosis during the cell cycle. In this study, two specific PIPs (PIP-A and PIP-B) targeting AURKA and AURKB promoter regions were designed and synthesized, and their biological effects were investigated by several in vitro assays. PIP-A and PIP-B significantly inhibited the promoter activities, mRNA expression, and protein levels of AURKA and AURKB, respectively, in a concentration-dependent manner. Moreover, 1:1 combination treatment with both PIPs demonstrated prominent antiproliferative synergy (CI value [ED(50)] = 0.256) to HeLa cells as a result of inducing apoptosis-mediated severe catastrophe of cell-cycle progression. The novel synthesized PIP-A and PIP-B are potent and specific gene-silencing agents for AURKA and AURKB.     

Entanglement properties of carboxymethyl cellulose and related polysaccharides

Entanglement network of carboxymethyl cellulose (CMC) was characterized based on the dynamic viscoelasticity of the concentrated solutions in an ionic liquid. According to the concentration dependence of the molecular weight between entanglements (M _e), M _e for the molten state (M _e,melt) for CMC was estimated to be 3.9 × 10³ as a chain variable reflecting the chemical structure of the polysaccharide. Furthermore, relations between M _e,melt and other chain variables were examined to elucidate the specificity in the entanglement properties of CMC and related polysaccharides. It was shown that the number of entanglement strands (P _e), the ratio of the cube of the tube diameter, and the volume occupied by the entanglement strand, for CMC was 72 being significantly larger than the universal value of ca. 20 recognized for flexible polymers. Anomalous values of P _e > 20 were also obtained for related polysaccharides such as cellulose and amylose.

Open image in new window

Graphical abstract ?

     

Discrimination of hairpin polyamides with an alpha-substituted-gamma-aminobutyric acid as a 5'-TG-3' reader in DNA minor groove

Pyrrole-imidazole (Py-Im) polyamides containing stereospecifically alpha-amino- or alpha-hydroxyl-substituted gamma-aminobutyric acid as a 5'-TG-3' recognition element were synthesized by machine-assisted Fmoc solid-phase synthesis. Their binding properties to predetermined DNA sequences containing a core binding site of 5'-TGCNCA-3'/3'-ACGN'GT-5' (N.N' = A.T, T.A, G.C, and C.G) were then systematically studied by surface plasmon resonance (SPR). SPR results revealed that the pairing of stereospecifically alpha-amino-/alpha-hydroxyl-substituted gamma-aminobutyric acids, (R or S)-alpha,gamma-diaminobutyric acid (gammaRN or gammaSN) and (R or S)-alpha-hydroxyl-gamma-aminobutyric acid (gammaRO or gammaSO), side-by-side with beta-alanine (beta) in such polyamides significantly influenced the DNA binding affinity and recognition specificity of hairpin polyamides in the DNA minor groove compared with beta/beta, beta/gamma, and gamma/beta pairings. More importantly, the polyamide Ac-Im-gammaSO-ImPy-gamma-ImPybetaPy-beta-Dp (beta/gammaSO) favorably binds to a hairpin DNA containing a core binding site of 5'-TGCNCA-3'/3'-ACGN'GT-5' (N.N' = A.T) with dissociation equilibrium constant (K(D)) of 1.9 x 10(-)(7) M over N.N' = T.A with K(D) = 3.7 x 10(-)(6) M, with a 19-fold specificity. By contrast, Ac-Im-gammaSN-ImPy-gamma-ImPybetaPy-beta-Dp (beta/gammaSN) binds to the above sequence with N.N' = A.T with K(D) = 8.7 x 10(-)(7) M over N.N' = T.A with K(D) = 8.4 x 10(-)(6) M, with a 9.6-fold specificity. The results also show that the stereochemistry of the alpha-substituent, as well as the alpha-substituent itself may greatly alter binding affinity and recognition selectivity of hairpin polyamides to different DNA sequences. Further, we carried out molecular modeling studies on the binding by an energy minimization method, suggesting that alpha-hydroxyl is very close to N3 of the 3'-terminal G to induce the formation of hydrogen bonding between hydroxyl and N3 in the recognition event of the polyamide Ac-Im-gammaSO-ImPy-gamma-ImPybetaPy-beta-Dp (beta/gammaSO) to 5'-TGCNCA-3'/3'-ACGN'GT-5' (N.N' = A.T). Therefore, SPR assays and molecular modeling studies collectively suggest that the (S)-alpha-hydroxyl-gamma-aminobutyric acid (gammaSO) may act as a 5'-TG-3' recognition unit.